Ross Synergy 2 SD, Руководство по установке, Страница: 315 / 414

Synergy Series Installation Guide (v18) Completing Setup • 10–23
Warning — Reset NV-RAM
• Press
Yes
to reset the contents of the NV-RAM .
• Press
No
to retain the current NV-RAM and exit the menu safely.
12. Use the following method to Reset all the S&T 3D Card memories and sequences:
• Press Default S&T3D to display the Reset S&T3D Warning Screen .
Warning — Reset S&T3D
• Press Yes to reset all memories and sequences on the S&T3D cards.
• Press
No
to retain the current S&T3D card settings and exit the menu safely.
13. Press
HOME
to exit the Recall Factory Menu 2-2 .
• Press
Confirm
to accept the recall and continue to the Main Menu 1-2 .
• Press
Cancel
to reject the recall and return to the Recall Factory Menu .
This completes the procedure for restoring default values.
Note If you have defaulted the Installation Registers , you will be prompted
to confirm your changes.