Ross Synergy 2 SD, Руководство по установке

Страница: 387 / 414

Synergy Series Installation Guide (v18) External DVEs • 13–41
8. Press
Finish Recording
, or the flashing custom control button, to finish recording to
the selected custom control. The custom control button will stop flashing.
This completest the procedure to program a GPI reset custom control macro for your external DVE.
Refer to the section “ Naming Custom Controls ” on page 8-42 for more information on naming
custom control buttons.
To play back your macro, exit the Custom Controls Menu and press the custom control button on the
control panel that you recorded the custom control macro to. Any recorded custom control can be
edited, refer to the section “
Editing Custom Control Macros ” on page 8-47 for details.
Trigger GPI Custom Control
Use the following procedure to program a GPI output trigger macro for your external DVE:
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) in the list have
already been programmed.
3. Navigate to the Special Menu as follows:
• Press Start Recording
B
Insert Special
B
Special .
Insert Special — Special Menu
Operating
Tip
As a recommendation, keep DVE Special Functions grouped together
on your
physical custom control buttons.