Ross Synergy 2 SD, Руководство по установке

Страница: 365 / 414

Synergy Series Installation Guide (v18) External DVEs • 13–19
Extra Options Setup
The Extra Options Menu for an external DVE allows you to complete the communications setup for
some of the external DVEs on the Synergy switcher.
Grass Valley DPM-100 Protocol
The Extra Options Menu for external DVEs using the Grass Valley DPM-100 Protocol allows you to
specify the GVG Model that you are setting up.
Use the following procedure to set up the Extra Options for a Grass Valley external DVE using the
DPM-100 Protocol:
1. Assign a Grass Valley DVE Model as follows:
Communications Extra Options — Grass Valley DMP-100 Menu
• Use the Com Port knob to select the remote port that the external DVE is
connected to.
• Use the
Option
knob to select
DPM Model
.
• Use the
Value
knob to select the model of external DVE that you are using. You
can select between the following:
~
DPM 100 — Use this option to assign a Grass Valley DPM-100 external DVE
to the selected com port.
~ DPM 700 — Use this option to assign a Grass Valley DPM-700 external DVE
to the selected com port.
This completes the procedure to set up the Extra Options for a Grass Valley external DVE using the
DPM-100 Protocol.
Setting Up DVE Send
Use the following procedure to set the functionality of the DVE Send button:
1. Navigate to the Personality Menu 3-4 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE .
Important
In previous versions of Synergy software, the DVE Send button was
used to control external DVEs. The default setting in version 14 or
higher system software is
Internal . Holding down the WIPE + DVE
SEND buttons will also activate Internal Squeeze & Tease
functionality when External is toggled on.