Ross Synergy 2 SD, Руководство по установке

Страница: 184 / 414

8–8 • Custom Control Basics Synergy Series Installation Guide (v18)
• Use the
Type
button to select the Custom Control Bank type you are creating.
~
Audio
— Use this option for macros that communicate with remote audio
mixers.
~ Normal — Use this option for macros that perform any function except
communicating with outboard audio mixers.
4. Press HOME to display the Installation Change Confirmation Screen .
5. Accept or reject the changes you have made as follows:
• Press Confirm to accept the changes.
• Press Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to set up Custom Control Banks. Next you will name your custom
control banks.
Naming Custom Control Banks
The Custom Control Bank Names Menu enables you to edit the names of your custom control
banks using a Standard PS/2 keyboard or by pressing or rotating the System Control buttons and
knobs. Refer to the section, “
Using The Keyboard ” in the Synergy Series Operation Guide for
details on using a standard PS/2 keyboard. The Custom Control Bank Names Menu includes the
following information:
• The Main Area of the Custom Control Bank Names Menu provides an array of letters
and numbers. The reverse video highlight indicates the “selected” character — the
position of which is controlled by the two upper scroll knobs. In the New Name field,
the reverse video highlight indicates the “active” character — the one that you are
changing.
• The Label Area provides an array of tools for naming and editing your physical names.
• The Scroll Area provides three functions for controlling the highlight and for selecting
the bank you want to name. You will notice that as you scroll through your banks, the
Current Name field tracks each name.
Use the following procedure to name custom control banks:
1. Navigate to the Custom Controls Menu as follows:
• Press HOME
B
MORE
B
Setup
B
Installation
B
MORE
B
Custom
Controls .
Operating
Tip
When an Audio Bank button is pressed and held , the PGM/PST
buses operate in Audio Custom Control Mode . In this mode, each
crosspoint represents the audio channel or group assigned to the
corresponding custom control button. This mode also shows the
current audio channels, or groups, assigned to the
PGM/PST buses.
For example, crosspoint 1 will represent the audio channel assigned to
custom control 1.
Operating
Tip
If you enable banks and do not have the Mnemonic Display option
installed, be sure to re-label the keycaps on the Synergy control panel
accordingly.