Ross Synergy 2 SD, Руководство по установке, Страница: 324 / 414

11–8 • Still Stores Synergy Series Installation Guide (v18)
Setting up Still Store BNCs
The Still Setup Menu allows you to associate a Still Store BNC input with a particular Still Store
communication port. In addition, you can select which channel on the Still Store is feeding the input
BNC on the Synergy SD frame.
Use the following procedure to assign the Still Store to a specific BNC input:
1. Navigate to the BNC Menu 1-3 as follows:
• Press
HOME B MORE B Setup B Installation B BNC
.
2. Press
BNC Type
to display the BNC Type Menu .
BNC — BNC Type Menu
3. Assign a BNC to a Still Store as follows:
• Use the
BNC
knob to select the BNC that is connected to the Still Store.
• Use the Type knob to select Still .
• Use the
Asp Ratio
knob to select the video aspect ratio of the Still Store output.
4. Press
MORE
to display the BNC Menu 2-3 .
5. Press
Still/CG Setup
to display the Still Setup Menu .
BNC — Still Setup Menu
6. Assign a specific Still Store to the Still BNC as follows:
Important
You must have a Still Store set up on the Synergy switcher before you
can assign a BNC to that device. Refer to the section “
Setting up the
Switcher ” on page 11–5 for more information on setting up Still Store
communications.