Rohde & Schwarz R&S FPH, Руководство пользователя

Страница: 388 / 484

Remote Commands
R&S ® Spectrum Rider FPH
383 User Manual 1321.1011.02 ─ 06.00
Usage:
Event
MMEMory:NAME
<FileName>
This command defines the path and filename that the R&S Spectrum Rider uses for
storing screenshots (see
HCOPy[:IMMediate]
on page 382). The path and filename
comply with DOS conventions.
This command is an event and therefore has no *RST value and no query.
Parameters:
<FileName> String containing the filename.
Example:
MMEM:NAME 'Public\Screeshots\Test.png'
Stores the screenshot in the corresponding directory on the R&S
Spectrum Rider.
13.6.8 Configuring Data Capture
The following commands configure the data capture.
These commands are independent from the operating mode.
List of commands
●
SYSTem:CAPTure:COUNter
on page 383
●
SYSTem:CAPTure:DATaset[:STATe]
on page 383
●
SYSTem:CAPTure:GPX[:STATe]
on page 384
●
SYSTem:CAPTure:MODE
on page 384
●
SYSTem:CAPTure:SCReen[:STATe]
on page 384
SYSTem:CAPTure:COUNter <CaptureCounter>
This command defines the start of the filename counter.
The counter numbers the files stored when you capture data (screenshots, datasets
etc.).
Parameters:
<CaptureCounter> String containing the number with which to start numbering files.
*RST:
'0000'
Example:
SYST:CAPT:COUN '0100'
Starts numbering files with 0100, e.g. Measurement0100.png.
SYSTem:CAPTure:DATaset[:STATe] <State>
This command includes or excludes datasets from the data capture.
Remote Control - Commands