Rohde & Schwarz R&S FPH, Руководство пользователя

Страница: 246 / 484

Interference Analyzer
R&S ® Spectrum Rider FPH
241 User Manual 1321.1011.02 ─ 06.00
Superimposed geotags
If one or more geotags superimpose each other, you can define rules as to which tag
(or its color) is displayed.
●
Press the [MEAS] key.
●
Select the "Settings" softkey.
●
Select the "Colors" softkey.
●
Select the "Default indicator " menu item.
The R&S Spectrum Rider opens a submenu to select the rule for displaying the
tag:
– Best: the tag with the best signal level is displayed.
– Average: the tag with the average level is displayed.
– Worst: the tag with the lowest signal level is displayed.
11.3.4 Measuring Interference
Interference measurements usually require an antenna to localize the source of inter-
ferers. The R&S Spectrum Rider supports several antenna models.
●
R&S HL300
●
R&S HE300
●
R&S HE400
Connected the antenna to the R&S Spectrum Rider at the USB interface and the RF
input.
You can control the antenna functionality in several ways in the general setup of the
R&S Spectrum Rider. For more information, see the Chapter 3.2.7.2, "Configuring
Antennas" , on page 53.
● Selecting an Antenna Model ................................................................................. 241
● Using Limits ...........................................................................................................242
11.3.4.1 Selecting an Antenna Model
There are two ways to select the antenna model for interference measurement.
●
Configure the antenna model in the instrument setup dialog, see Chapter 3.2.7.2,
"Configuring Antennas" , on page 53.
●
Configure the antenna model in the "Triangulation" mode. See "Setup antenna
model in the triangulation mode" on page 241
Setup antenna model in the triangulation mode
1. Press the [MEAS] key.
2. Select the "Meas Mode" softkey.
The R&S Spectrum Rider opens a submenu to select the measurement mode.
Working with Maps