Interference Analyzer
R&S
®
Spectrum Rider FPH
237
User Manual 1321.1011.02 ─ 06.00
Using the touchscreen gesture
Use the touchscreen gesture to navigate on the map area:
●
Swipe in your desired direction (horizontally, vertically or diagonally) to navigate the
position on the map.
●
Pinch or stretch two fingers horizontally to adjust the zoom span of the map area
and use.
Manual alignment
Alternatively, you can use the keypad keys on the R&S Spectrum Rider to navigate the
position in the map.
●
Press [2] key to navigate the position upward on the map.
●
Press [4] key to navigate the position to the left side on the map.
●
Press [6] key navigate the position to the right side on the map.
●
Press [8] key navigate the position downward on the map.
You can move the maps until you reach the borders of the downloaded content. Note
that the borders of the maps might be different for different scales.
Automatic alignment
For most automatic map alignment functions, you have to establish a GPS connection.
1. Press the [MEAS] key.
2. Select the "GPS Position" softkey.
The R&S Spectrum Rider displays a softkey menu that provides various functions
to control and work with GPS data.
● Select the "Go To" softkey (Outdoor Mapping Mode).
– "Currrent Position"
Moves your current position to the center of the display once.
– "Saved Position"
Moves your saved position to the center of the display once.
● "Go To Triangulation" softkey (Triangulation Mode)
Moves the location of the triangulation result to the center of the display.
11.3.3.4
Aligning the Indoor Mapping Mode
The R&S Spectrum Rider automatically aligns the map when you move the cross-hairs
icon
displayed on the map. The cross-hairs icon represents your current position
on the map.
Moving the cross-hairs icon is necessary to define another measurement location. This
is only possible by manually changing the position of the cross-hairs icon.
Working with Maps
