Rohde & Schwarz R&S FPH, Руководство пользователя

Страница: 103 / 484

Instrument Functions
R&S ® Spectrum Rider FPH
98 User Manual 1321.1011.02 ─ 06.00
4.7 Saving On Events
The R&S Spectrum Rider provides functionality that automatically saves measurement
information if a certain situation or event occurs.
Saving events is possible in all operating modes.
1. Press the [SETUP] key.
2. Select the "User Preference" softkey.
3. Select the "Save On Event" menu item.
A drop- down menu to disable or enable the "Save On Event" opens.
4. Select "On" to enable the "Save On Event" menu item.
The R&S Spectrum Rider turns on automatic event recognition. You can select one
of several events that trigger the storage of measurement data. See
"Event types"
on page 99.
Data types
You can select several data types to save when an event occurs.
●
A screenshot of the sweep that contains the event (
.png
or
.jpg
file)
●
A dataset of the sweep that contains the event (
.set
file)
●
The GPS coordinates of the location where the event happens (
.gpx
file).
1. Press the [SETUP] key.
2. Select the "User Preference" softkey.
3. Select the "Capture Screen", "Capture Dataset" or "Capture GPX" menu item and
turn it on or off.
If the setting is turns "On", the corresponding information is included in the saved
data.
See
Chapter 4.6, "Taking Screenshots" , on page 95.
Timing of the data capture
The R&S Spectrum Rider evaluates the measured data after a sweep is done and thus
detects and saves an event only after a sweep has been completed.
Saving On Events