Remote Commands
R&S
®
Spectrum Rider FPH
324
User Manual 1321.1011.02 ─ 06.00
●
CALCulate<1...2>:LIMit<1...2>:UPPer:THReshold
CALCulate<1...2>:LIMit<1...2>:BEEP[:STATe]
<State>
This command turns the beeper that beeps if a limit line is violated on and off.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:LIM:BEEP ON
Activates the audio beep.
CALCulate<1...2>:LIMit<1...2>:COMMent?
This command queries the description of a limit line.
This command is a query and therefore has no RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Example:
CALC:LIM:COMM?
Queries the description of limit line 1.
Usage:
Query only
CALCulate<1...2>:LIMit<1...2>:DEFine
<Name>, <Description>, <X-unit>, <X-scale>,
<Y-unit>, <X0...X99>, <Y0...Y99>
This command defines the shape of a limit line.
After you have defined the shape of the limit line, you still have to activate it with
CALCulate<1...2>:LIMit<1...2>:UPPer:SELect
effect.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Parameters:
<Name>
String containing the name of the limit line.
Note: if a limit line with the same name already exists, it is over-
written.
<Description>
String containing a comment for the limit line.
<X-unit>
HZ | S | M
Unit of the x-axis.
Remote Control - Commands
