Using the Internal Power Meter
R&S
®
Spectrum Rider FPH
210
User Manual 1321.1011.02 ─ 06.00
8
Using the Internal Power Meter
R&S Spectrum Rider option
R&S FPH-K19 (order number: 1321.0721.02) option is required to operate the R&S
Spectrum Rider in the internal power mode.
With the installation of internal power meter option, the R&S Spectrum Rider also sup-
ports power measurements without using a power sensor. In that case, you can con-
nect the DUT directly to the R&S Spectrum Rider and still perform accurate channel
power measurements.
1 = Channel power meter mode
2 = Readout of the measured power
3 = Reference for relative power measurements
4 = RF attenuation setting
5 = Preamplifier state
6 = Measurement channel bandwidth
7 = Power offset
8 = Analog readout of the measured power
9 = Measurement frequency
10 = Channel power softkey menu
Performing and configuring channel power measurements
The configuration of channel power measurements without a power sensor is similar to
measurement with a power meter.
The following features are available:
●
Defining the frequency
●
Zeroing the measurement
