Rohde & Schwarz R&S FPH, Руководство пользователя

Страница: 387 / 484

Remote Commands
R&S ® Spectrum Rider FPH
382 User Manual 1321.1011.02 ─ 06.00
●
MMEMory:NAME
on page 383
DISPlay<1...2>[:WINDow]:STORe
<TargetFile>
This command makes a screenshot of the current display content in png or jpg format
and stores it on the R&S Spectrum Rider internal memory.
You can select a filename for the screenshot in png format with
MMEMory:NAME
on page 383 and select the file format of the screenshot with
HCOPy:DEVice:
LANGuage
on page 382.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at DISPlay is irrelevant for this command.
Parameters:
<TargetFile>
Example:
HCOP:DEV:LANG PNG
MMEM:NAME '\Public\Screen Shots\Test.png'
DISP:WIND:STOR
Makes and stores a screenshot of the current screen in a file
'Test.png'.
Usage: Setting only
HCOPy:DEVice:LANGuage <Format>
This command selects the file format for screenshots.
Parameters:
<Format> PNG | JPG
Example:
HCOP:DEV:LANG PNG
Selects the png format for screenshots.
HCOPy[:IMMediate]
This command makes a screenshot of the current display content in png format and
stores it on the R&S Spectrum Rider internal memory.
You can select a filename for the screenshot in png format with
MMEMory:NAME
on page 383 and select the file format of the screenshot with
HCOPy:DEVice:
LANGuage
on page 382.
To make a screenshot in jpg format, use
DISPlay<1...2>[:WINDow]:STORe
on page 382.
This command is an event and therefore has no *RST value and no query.
Example:
HCOP:DEV:LANG PNG
MMEM:NAME '\Public\Screen Shots\Test.png'
HCOP
Makes and stores a screenshot of the current screen in a file
'Test.png'.
Remote Control - Commands