Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 991 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
991 User Manual 1178.8520.02 ─ 08
INITiate<n>[:IMMediate]
on page 861
See Chapter 12.5.1, "Performing measurements" , on page 859
12.5.9.3 Retrieving measurement results
The following commands query the results for time domain measurements.
Measuring the mean power
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:AVERage:RESult?
....................... 991
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:PHOLd:RESult?
.......................... 991
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:RESult?
......................................992
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:AVERage:RESult?
This command queries the average mean time domain power. The query is only possi-
ble if averaging has been activated previously using
CALCulate<n>:MARKer<m>:
FUNCtion:SUMMary:AVERage
on page 988.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
INITiate<n>:CONTinuous
on page 860.
Suffix:
<n>
.
Window
<m> Marker
Return values:
<MeanPower> Mean power of the signal during the measurement time.
Usage: Query only
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:PHOLd:RESult?
This command queries the maximum mean time domain power. The query is only pos-
sible if the peak hold function has been activated previously using
CALCulate<n>:
MARKer<m>:FUNCtion:SUMMary:PHOLd
.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
INITiate<n>:CONTinuous
on page 860.
Suffix:
<n>
.
Window
<m> Marker
Return values:
<MeanPower> Mean power of the signal during the measurement time.
Configuring and performing measurements