Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 881 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
881 User Manual 1178.8520.02 ─ 08
CALCulate<n>:LIMit<li>:ACPower:ALTernate<ch>[:RELative]:STATe <State>[,
<State>]
This command turns the relative limit check for the alternate channels on and off.
You have to activate the general ACLR limit check before using this command with
CALCulate<n>:LIMit<li>:ACPower[:STATe]
.
Suffix:
<n>
.
irrelevant
<li> irrelevant
<ch> 1..n
Alternate channel number
Parameters:
<State> ON | OFF | 1 | 0
Relative limit check for lower alternate channel
*RST:
0
<State> ON | OFF | 1 | 0
Relative limit check for upper alternate channel
*RST:
0
Manual operation: See "Limit Check" on page 181
See "Limit Checking" on page 193
CALCulate<n>:LIMit<li>:ACPower[:STATe] <State>
This command turns the limit check for ACLR measurements on and off.
Suffix:
<n>
.
irrelevant
<li> irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Manual operation: See "Limit Check" on page 181
See "Limit Checking" on page 187
See "Limit Checking" on page 193
12.5.3.6 General ACLR measurement settings
The following commands control the measurement algorithm.
Useful commands for the ACLR measurement described elsewhere:
●
[SENSe:]POWer:NCORrection
on page 1117
●
[SENSe:]POWer:ACHannel:PRESet
on page 865
●
[SENSe:]POWer:ACHannel:PRESet:RLEVel
on page 866
Configuring and performing measurements