Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 570 / 1489

Common analysis and display functions
R&S
®
FSVA3000/ R&S
®
FSV3000
570 User Manual 1178.8520.02 ─ 08
For details on thresholds see "Thresholds" on page 562.
Remote command:
CALCulate<n>:LIMit<li>:LOWer:THReshold
on page 1238
CALCulate<n>:LIMit<li>:UPPer:THReshold
on page 1242
Margin
Defines a margin for the limit line. The default setting is 0 dB (i.e. no margin).
For details on margins see "Limits and Margins" on page 562.
Remote command:
CALCulate<n>:LIMit<li>:LOWer:MARGin
on page 1236
CALCulate<n>:LIMit<li>:UPPer:MARGin
on page 1240
X-Axis
Describes the horizontal axis on which the data points of the limit line are defined.
Includes the following settings:
●
Unit:
–
"Hz": for frequency domain
– "s": for time domain
●
Scaling mode: absolute or relative values
For relative values, the frequencies are referred to the currently set center fre-
quency. In the time domain, the left boundary of the diagram is used as the refer-
ence.
●
Scaling: linear or logarithmic
Remote command:
CALCulate<n>:LIMit<li>:LOWer:MODE
on page 1236
CALCulate<n>:LIMit<li>:UPPer:MODE
on page 1240
CALCulate<n>:LIMit<li>:CONTrol:DOMain
on page 1234
CALCulate<n>:LIMit<li>:CONTrol:SPACing
on page 1235
Y-Axis
Describes the vertical axis on which the data points of the limit line are defined.
Includes the following settings:
●
Level unit
●
Scaling mode: absolute or relative (dB/%) values
Relative limit values refer to the reference level.
●
Limit type: upper or lower limit; values must stay above the lower limit and below
the upper limit to pass the limit check
Remote command:
CALCulate<n>:LIMit<li>:UNIT
on page 1239
CALCulate<n>:LIMit<li>:LOWer:SPACing
on page 1237
CALCulate<n>:LIMit<li>:UPPer:SPACing
on page 1241
Data Points
Each limit line is defined by a minimum of 2 and a maximum of 200 data points. Each
data point is defined by its position (x-axis) and value (y-value). Data points must be
defined in ascending order. The same position can have two different values.
Display and limit lines