Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 884 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
884 User Manual 1178.8520.02 ─ 08
Suffix:
<sb>
.
1 to 8
sub block number
<ch> 1..n
Tx channel number
Parameters:
<State> ON | OFF | 1 | 0
*RST:
W-CDMA: 1, other technologies: 0
Manual operation: See "Weighting Filters" on page 190
[SENSe:]POWer:ACHannel:SBCount <Number>
This command defines the number of sub blocks, i.e. groups of transmission channels
in an MSR signal.
For more information see Chapter 5.3.3.4, "Measurement on multi-standard radio
(MSR) signals" , on page 167.
Parameters:
<Number> Range: 1 to 8
*RST: 1
Manual operation: See "Number of Sub Blocks" on page 185
[SENSe:]POWer:ACHannel:SBLock<sb>:BWIDth[:CHANnel<ch>] <Bandwidth>
[SENSe:]POWer:ACHannel:SBLock<sb>:BANDwidth[:CHANnel<ch>]
<Bandwidth>
This command defines the bandwidth of the specified MSR Tx channel.
This command is for MSR signals only (see
CALCulate<n>:MARKer<m>:
FUNCtion:POWer<sb>:PRESet
on page 867).
Suffix:
<sb>
.
1 to 8
sub block number
<ch> 1..n
Tx channel number
Parameters:
<Bandwidth> Bandwidth in Hz
Default unit: Hz
Manual operation: See "Tx Channel Bandwidth" on page 190
[SENSe:]POWer:ACHannel:SBLock<sb>:CENTer[:CHANnel<ch>] <Frequency>
This command defines the (absolute) center frequency of the specified MSR Tx chan-
nel.
Configuring and performing measurements