Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 719 / 1489

General instrument setup
R&S
®
FSVA3000/ R&S
®
FSV3000
719 User Manual 1178.8520.02 ─ 08
Insert Value
Inserts a data point in the transducer line above the selected one in the "Edit Trans-
ducer" dialog box.
Delete Value
Deletes the selected data point in the "Edit Transducer" dialog box.
Shift x
Shifts the x-value of each data point horizontally by the defined shift width.
Shift y
Shifts the y-value of each data point vertically by the defined shift width.
Save
Saves the currently edited transducer line under the name defined in the "Name" field.
Remote command:
MMEMory:SELect[:ITEM]:TRANsducer:ALL
on page 1259
MMEMory:STORe<1|2>:STATe
on page 1262
Import
Opens a file selection dialog box and loads the transducer factor from the selected file
in
.CSV
format.
Note that a valid import file must contain a minimum of required information for the
R&S
FSV/A. For details on the file format see Chapter 10.5.3, "Reference: transducer
factor file format" , on page 720.
Remote command:
MMEMory:LOAD<n>:TFACtor
on page 1300
File Explorer ← Import
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
Export
Opens a file selection dialog box and stores the currently displayed transducer factor to
the defined file in
.CSV
format.
For details on the file format see Chapter 10.5.3, "Reference: transducer factor file for-
mat" , on page 720.
The transducer factor can be imported again later by the R&S FSV/A for use in other
measurements.
Remote command:
MMEMory:STORe<n>:TFACtor
on page 1300
File Explorer ← Export
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
Transducers