Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 816 / 1489

Network operation and remote control
R&S
®
FSVA3000/ R&S
®
FSV3000
816 User Manual 1178.8520.02 ─ 08
For <interface> = snmp , you get a
.zip
file containing the MIB files for SNMP. For
<interface> = rest , you get a web page with the OpenAPI specification of the REST
API.
Address example: http://fsva3030-123456/api/hums/v1/documents?name=snmp .
The following table lists the REST endpoints and the SNMP MIB file names.
For further information about the HUMS service itself, see R&S HUMS user manual.
You can download or view the manual on the internet.
● Basic settings ........................................................................................................816
● Protocol settings ....................................................................................................817
● Device tags ........................................................................................................... 820
11.6.5.1 Basic settings
Access: [SETUP] > "N Remote" > "HUMS" tab
The "HUMS" tab of the "N Remote" dialog provides basic R&S HUMS configu-
ration functions.
To export the complete HUMS history, use the REST API with the endpoint:
http://<IP>/api/hums/v1/dump
The remote commands to configure HUMS are described in Chapter 12.10.8, "Config-
uring HUMS" , on page 1331.
State ............................................................................................................................816
Enhanced Settings ...................................................................................................... 817
View Tracked Information ............................................................................................817
Delete HUMS History .................................................................................................. 817
State
Turns HUMS on or off.
If you want to track HUMS data, turn on this function.
If HUMS has been used before, turning on restores the previous protocol settings .
Remote command:
DIAGnostic:HUMS:STATe
on page 1332
Network and remote control settings