Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1135 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1135 User Manual 1178.8520.02 ─ 08
Manual operation: See "Trigger 1/2" on page 444
OUTPut<up>:TRIGger<tp>:LEVel <Level>
This command defines the level of the (TTL compatible) signal generated at the trigger
output.
This command works only if you have selected a user-defined output with
OUTPut<up>:TRIGger<tp>:OTYPe
.
Suffix:
<up>
.
1..n
<tp> Selects the trigger port to which the output is sent.
2 = trigger port 2 (front)
3 = trigger port 3 (rear)
2 = Trigger 2 Input / Output
Parameters:
<Level> HIGH
5 V
LOW
0 V
*RST:
LOW
Example: OUTP:TRIG2:LEV HIGH
Manual operation: See "Level" on page 445
OUTPut<up>:TRIGger<tp>:OTYPe <OutputType>
This command selects the type of signal generated at the trigger output.
Suffix:
<up>
.
1..n
<tp> Selects the trigger port to which the output is sent.
2 = trigger port 2 (front)
3 = trigger port 3 (rear)
2 = Trigger 2 Input / Output
Parameters:
<OutputType> DEVice
Sends a trigger signal when the R&S FSV/A has triggered inter-
nally.
TARMed
Sends a trigger signal when the trigger is armed and ready for
an external trigger event.
UDEFined
Sends a user-defined trigger signal. For more information, see
OUTPut<up>:TRIGger<tp>:LEVel
.
*RST: DEVice
Setting basic measurement parameters