Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 70 / 1489

Getting started
R&S
®
FSVA3000/ R&S
®
FSV3000
70 User Manual 1178.8520.02 ─ 08
3.3.2.13 External generator control option (R&S FSV3-B10)
The external generator control option uses a LAN connection and the "AUX control"
connector.
For details on connecting an external generator, see the "External Generator Control"
section of the R&S
FSV/A user manual.
3.3.2.14 OCXO option (R&S FSV3-B4)
This option generates a 10 MHz reference signal with a very precise frequency. If
installed, and if no external signal is used, this signal is used as an internal reference.
It can also be used to synchronize other connected devices via the REF
Out-
put 640 MHz connector.
Warm-up time for OCXO
When the instrument is switched on, the OCXO requires an extended warm-up time
(see data sheet).
3.3.2.15 Labels on R&S FSV/A
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 35
●
Product and environment safety, see Table 3-5
●
Identification of the product, see Chapter 3.3.2.16, "Device ID" , on page 70
Table 3-5: Labels regarding R&S FSV/A and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life. For more information, see the product user manual,
chapter "Disposal".
3.3.2.16 Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of the
R&S
FSV/A.
It consists of the device order number and a serial number.
Instrument tour