Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 893 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
893 User Manual 1178.8520.02 ─ 08
<gap> 1 | 2
Gap (CACLR) channel number
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: CALC:LIM:ACP:GAP1:ABS:STAT ON
CALCulate<n>:LIMit<li>:ACPower:GAP<gap>[:AUTO]:ACLR[:RELative] <Limit>[,
<UpperLimit>]
This command defines the relative limit for the ACLR power in the specified gap chan-
nel. The reference value for the relative limit is the measured channel power.
If you define both an absolute limit and a relative limit, the R&S FSV/A uses the lower
value for the limit check.
Suffix:
<n>
.
irrelevant
<li> irrelevant
<gap> 1 | 2
Gap (CACLR) channel number
Parameters:
<Limit> Defines the relative limit for the ACLR power in the specified gap
channel in dB.
Default unit: DB
<UpperLimit> Ignored.
Default unit: DB
Example: CALC:LIM:ACP:GAP1:ACLR:REL 3dB
CALCulate<n>:LIMit<li>:ACPower:GAP<gap>[:AUTO]:ACLR[:RELative]:STATe
<State>
This command turns the relative limit check for the specified gap (CACLR) channel on
and off.
You have to activate the general ACLR limit check before using this command with
CALCulate<n>:LIMit<li>:ACPower[:STATe]
.
Suffix:
<n>
.
irrelevant
<li> irrelevant
<gap> 1 | 2
Gap (CACLR) channel number
Configuring and performing measurements