Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 912 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
912 User Manual 1178.8520.02 ─ 08
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Name> String containing the name of the channel
*RST:
ALT<1...11>
[SENSe:]POWer:ACHannel:SBLock<sb>:NAME[:CHANnel<ch>] <Name>
This command defines the name of the specified MSR Tx channel.
This command is for MSR signals only.
In MSR ACLR measurements, the default TX channel names correspond to the speci-
fied technology, followed by a consecutive number. The assigned sub block
(A,B,C,D,E,F,G,H) is indicated as a prefix (e.g. A: WCDMA1).
This command is for MSR signals only (see
CALCulate<n>:MARKer<m>:
FUNCtion:POWer<sb>:PRESet
on page 867).
Suffix:
<sb>
.
1 to 8
sub block number
<ch> 1 to 18
Tx channel number
Parameters:
<Name> String containing the name of the channel
Example: POW:ACH:SBL2:NAME:CHAN2?
Result:
'B:WCDMA'
Manual operation: See "Tx Channel Definition" on page 189
12.5.3.8 Performing an ACLR measurement
The following commands are required to perform an ACLR measurement:
●
CALC:MARK:FUNC:POW:SEL ACP
, see
CALCulate<n>:MARKer<m>:
FUNCtion:POWer<sb>:SELect
on page 864
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>[:STATe]
on page 865
●
INITiate<n>[:IMMediate]
on page 861
12.5.3.9 Retrieving and analyzing measurement results
The following commands retrieve and analyze measurement results for ACLR mea-
surements.
Configuring and performing measurements