![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371163.webp)
Remote control commands
R&S
®
NRPM
163
User Manual 1425.8663.02 ─ 07
STATus:OPERation:ULFail[:SUMMary][:EVENt]?
STATus:QUEStionable[:EVENt]?
STATus:QUEStionable:CALibration[:SUMMary][:EVENt]?
STATus:QUEStionable:POWer[:SUMMary][:EVENt]?
These commands read out the
EVENt
section of the status register.
At the same time, the commands delete the contents of the
EVENt
section.
Usage:
Query only
10.11.4
Controlling the ENABle part
For more information on the ENABLe part see
Chapter A.2.2, "Structure of an
STATus:DEVice:ENABle
<value>
STATus:OPERation:CALibrating:ENABle
<value>
STATus:OPERation:ENABle
<value>
STATus:OPERation:LLFail:ENABle
<value>
STATus:OPERation:MEASuring:ENABle
<value>
STATus:OPERation:SENSe:ENABle
<value>
STATus:OPERation:TRIGger:ENABle
<value>
STATus:OPERation:ULFail:ENABle
<value>
STATus:QUEStionable:CALibration:ENABle
<value>
STATus:QUEStionable:ENABle
<value>
STATus:QUEStionable:POWer:ENABle
<value>
These commands control the
ENABle
part of a register.
The
ENABle
part allows true conditions in the
EVENt
part of the status register to
be reported in the summary bit. If a bit is 1 in the enable register and its associ-
ated event bit transitions to true, a positive transition will occur in the summary bit
reported to the next higher level.
Parameters:
<value>
*RST:
0
10.11.5
Controlling the negative transition part
For more information on the negative transition part see
Using the status register