![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371078.webp)
Performing measurements
R&S
®
NRPM
78
User Manual 1425.8663.02 ─ 07
Access:
► In the settings navigation pane of the web browser-based user interface,
select "System".
The remote commands required to define the system settings are described in
Chapter 10.4.1, "Configuring the system"
.........................................................................................79
IP Address
Sets the IP address of the sensor module.
Remote command:
SYSTem:COMMunicate:NETWork:IPADdress
Subnet Mask
Sets the subnet mask.
The subnet mask consists of four number blocks separated by dots. Every block
contains 3 digits at a maximum.
Remote command:
SYSTem:COMMunicate:NETWork:IPADdress:SUBNet:MASK
Gateway
Sets the address of the default gateway, that means the router that is used to for-
ward traffic to destinations beyond the local network. This router is on the same
network as the instrument.
Remote command:
SYSTem:COMMunicate:NETWork:IPADdress:GATeway
Measurement applications