Remote control commands
R&S
®
NRPM
112
User Manual 1425.8663.02 ─ 07
Example:
SYSTem:LED:MODE USER
Selects "User" mode for the system status LED.
SYSTem:LED:COLor #HA000A0
Sets the LED color to magenta.
SYSTem:LED:COLor #H00C000
Sets the LED color to green.
SYSTem:LED:MODE SENSor
Sets the system status LED operating mode back to the
sensor internal settings.
SYSTem:LED:MODE
<mode>
Selects whether the color of the system status LED is controlled by the firmware
of the sensor internally or by the user settings.
.
Parameters:
<mode>
USER | SENSor
*RST:
SENSor
SYSTem:MINPower?
Yields the lower power measurement limit.
The lower measurement limit refers to the sensor or to the combination of a sen-
sor and the components connected ahead of it. This query can be used to deter-
mine a useful resolution for the result display near the lower measurement limit.
Usage:
Query only
SYSTem:PARameters?
Lists all commands with default values, limits and ranges.
Usage:
Query only
Configuring the general functions