![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371117.webp)
Remote control commands
R&S
®
NRPM
117
User Manual 1425.8663.02 ─ 07
10.4.4
Setting the power unit
The
UNIT
subsystem contains command for setting up the power unit.
UNIT:POWer
<unit>
Sets the output unit for the measured power values.
Parameters:
<unit>
DBM | W
*RST:
W
10.4.5
Setting the result format
The
FORMat
subsystem sets the format of numeric data (measured values) that
is exchanged between the remote control computer and the sensor modules if
high-level measurement commands are used.
Remote commands:
...............................................................................................118
FORMat:BORDer
<border>
Selects the order of bytes in 64-bit binary data.
Parameters:
<border>
NORMal | SWAPped
NORMal
The 1st byte is the LSB, the 8th byte the MSB.
This format fulfills the "Little Endian" convention.
SWAPped
The 1st byte is the most significant byte (MSB), the 8th
byte the least significant byte (LSB).
This format fulfills the "Big Endian" (big end comes first)
convention.
*RST:
NORMal
Configuring the general functions