Remote control commands
R&S
®
NRPM
140
User Manual 1425.8663.02 ─ 07
Explanation:
'THIS IS A TEST'
has 14 bytes, and '14' has 2 digits, hence the
#214
User-data-content
The previous paragraphs described how to separate the "user-data-content" from
the header. We keep the designator "user-data-content" in the further description
for denoting the totality of the contained measurement results.
The further description deals with the "user-data-content" and shows what is
embedded in it. There are similar mechanisms as with "Arbitrary Block Response
Data" in the "user-data-content". As indicated above, the user-data-content can
have one or more sections with trace measurement results, depending on the
selection of auxiliary measurands.
Each section is made up of a certain sequence. The following example assumes
that the number of data points has been chosen as 260.
Figure 10-2: User-data-content format
y = number of values which follow the header
x = number of digits of y
Configuring the measurement modes