![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371167.webp)
Remote control commands
R&S
®
NRPM
167
User Manual 1425.8663.02 ─ 07
While zero calibration is in progress, no queries or other setting commands are
allowed. Any communication attempt can run into a timeout.
The setting command accepts only the parameter
ONCE
;
OFF
and
ON
are ignored.
The query returns the value
ON
if a calibration is in progress, otherwise the value
OFF
.
Suffix:
<Channel>
.
1...4
The channel suffix is ignored.
Parameters:
<state>
*RST:
OFF
Manual operation:
Calibrating/zeroing the R&S
NRPM3(N) sensor module