Setting up a measurement
R&S
®
NRPM
55
User Manual 1425.8663.02 ─ 07
Use hostnames to identify the sensor module
In networks using a DHCP server, it is recommended that you address the
sensor module by its unambiguous hostnames, see
A
hostname
is a unique identifier of the sensor module that remains perma-
nent as long as it is not explicitly changed. Hence, you can address a sen-
sor module by the same identification, irrespectively if a network or a point-
to-point connection is used.
6.4
Starting the measurement
To start the measurement
To start an R&S
NRPM OTA power measurement, it is assumed that all compo-
nents of the test setup are connected.
An easy way for configuring the measurement and displaying results is given by
the R&S
Power
Viewer software:
► Start the R&S
Power
The R&S
Power
Viewer identifies sensor modules that are connected to USB
automatically. If you are working with an R&S
NRPM3N network sensor mod-
ule, define the corresponding network connection in the R&S
Power
Viewer
"Sensor' > VISA Connection" dialog, before you start a measurement.
Starting the measurement