![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371095.webp)
Remote control commands
R&S
®
NRPM
95
User Manual 1425.8663.02 ─ 07
Example:
Command
[SENSe<Sensor>:][POWer:][AVG:]SMOothing:STATe 1
can
be written as:
SENSe1:POWer:AVG:SMOothing:STATe 1
SENS:POW:AVG:SMO:STAT 1
SENSe:POWer:SMOothing:STATe 1
SENSe:SMOothing:STATe 1
SMOothing:STATe 1
SMO:STAT 1
Parameters
Parameters must be separated from the header by a "white space". If several
parameters are specified in a command, they are separated by a comma (,). For
a description of the parameter types, refer to
Chapter A.1.3, "SCPI parameters"
Example:
Definition:
[SENSe<Sensor>:]AVERage:COUNt:AUTO:NSRatio <nsr>
Command:
AVER:COUN:AUTO:NSR 0.01
Special characters | and { }
|
A vertical bar in parameter definitions indicates alternative possibilities in the
sense of "or". The effect of the command differs, depending on which parame-
ter is used.
Example
:
Definition:
INITiate:CONTinuous ON | OFF
Command
INITiate:CONTinuous ON
starts the measurements
Command
INITiate:CONTinuous OFF
stops the measurements
{ }
Parameters in braces may be included in the command once, several times or
not at all.
Notations