![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371165.webp)
Remote control commands
R&S
®
NRPM
165
User Manual 1425.8663.02 ─ 07
Setting a bit causes a 0 to 1 transition in the corresponding bit of the associated
register. The transition also writes a 1 into the associated bit of the corresponding
EVENt
register.
Parameters:
<value>
*RST:
65535
10.12
Testing the R&S
NRPM OTA Power Measure-
ment Solution
The selftest allows a test of the internal circuitry of the sensor.
TEST:SENSor?
[<Item>]
Triggers a selftest of the sensor module. In contrast to
returns detailed information that you can use for troubleshooting.
Note:
Do not apply a signal while the selftest is running because it can indicate
errors in the output messages for the test steps
Offset Voltages
and/or
Noise Vol-
tages
.
Query parameters:
<Item>
String
Usage:
Query only
Manual operation:
10.13
Calibrating/zeroing the R&S
NRPM3(N) sensor
module
Zeroing removes offset voltages from the analog circuitry of the sensor modules,
so that there are only low powers displayed when there is no power applied. The
zeroing process may take more than 8 seconds to complete.
We recommend that you zero in regular intrervals (at least once a day), if :
●
The temperature has varied by more than 5 K.
Calibrating/zeroing the R&S
NRPM3(N) sensor module