![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371135.webp)
Remote control commands
R&S
®
NRPM
135
User Manual 1425.8663.02 ─ 07
Parameters:
<count>
Range:
1 to 8192
*RST:
1
Example:
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE
10
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:STATe
<state>
Enables or disables the buffered continuous average mode. If the buffer mode is
enabled, all results generated by trigger events are collected in the sensor mod-
ule until the buffer is filled.
You can set the size of the buffer using
Parameters:
<state>
*RST:
OFF
Example:
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:STATe
OFF
[SENSe<Sensor>:][POWer:][AVG:]SMOothing:STATe
<state>
Activates the smoothing filter, a steep-edge digital lowpass filter. If you cannot
adjust the aperture time exactly to the modulation period, the filter reduces result
fluctuations caused by modulation.
Parameters:
<state>
ON | OFF
*RST:
OFF
Example:
SMOothing:STATe OFF
Manual operation:
10.7.2
Configuring a list mode measurement
The list mode measurement enables you to execute a sequence of measure-
ments at various frequency points in continuous average mode automatically.
Remote commands:
Configuring the measurement modes