Setting up a measurement
R&S
®
NRPM
50
User Manual 1425.8663.02 ─ 07
2. Connect the controller PC to the Ethernet switch.
3. On the controller, establish a connection between the sensor module and the
Chapter 6.3.5, "Establishing a connection to the network"
Setup with a PoE injector and a non-PoE Ethernet switch
Required equipment
●
1 R&S
NRPM3N sensor module
●
3 RJ-45 Ethernet cables
●
1 PoE injector
●
1 non-PoE Ethernet switch
●
Controller PC with LAN interface and installed VISA driver or R&S
NRP
Toolkit
and R&S
Power
Viewer
Mobile
●
Controller PC
Setup
Figure 6-8: Setup with a PoE injector and a non-PoE Ethernet switch
1
= Controller PC
2,4,6 = RJ-45 Ethernet cables
3
= Non-PoE Ethernet switch
5
= PoE injector
7
= LAN connector (RJ-45 Ethernet PoE interface)
8
= R&S
NRPM3N LAN sensor module
9
= Antenna connector
10
= Antenna module(s)
11
= AC power supply
Connecting an R&S
NRPM OTA power measurement setup