Remote control commands
R&S
®
NRPM
156
User Manual 1425.8663.02 ─ 07
TRIGger:HOLDoff
<holdoff>
Sets the hold off time, a time period after a trigger event. During the hold off time
all further trigger events are ignored, see
Figure 10-4: Effect of the trigger holdoff time
Parameters:
<holdoff>
Range:
0.00 to 10.00
*RST:
0.00
Default unit: s
Manual operation:
TRIGger:HYSTeresis
<hysteresis>
Sets the hysteresis thresholds. A trigger event occurs, if the trigger level:
●
Falls below the set value on a rising slope.
●
Rises above the set value on a falling slope.
You can use the hysteresis to eliminate the effects of noise in the signal on the
edge detector of the trigger system.
Parameters:
<hysteresis>
Range:
0.00 to 10.00
*RST:
0.00
Default unit: dB
Manual operation:
Configuring the trigger