![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371059.webp)
Performing measurements
R&S
®
NRPM
59
User Manual 1425.8663.02 ─ 07
2. In the lower border toolbar, select the sensor module.
3. Execute zeroing:
Note:
Turn off all measurement power signals before zeroing. An active mea-
surement during zeroing causes an error.
a) Turn off the measurement signal.
b) Select "Sensor > Zero (Signal off)".
4. In the panel on the right, select the antenna modules for the measurement.
5. If necessary, set the parameters to configure the continuous average power
measurement.
6. Set the frequency.
7. Start the measurement.
Measurement applications