Remote control commands
R&S
®
NRPM
111
User Manual 1425.8663.02 ─ 07
SYSTem:LANGuage
<language>
Selects an emulation of a different command set.
Parameters:
<language>
SCPI
*RST:
SCPI
SYSTem:LED:CHANnel<Channel>:COLor
<color>
Sets the color of the antenna module LED.
The suffix <channel> selects the corresponding antenna module, and the suffix
<color> selects LED on/off.
Suffix:
<Channel>
.
1...3
Parameters:
<color>
0
The LED is off.
> 0
The LED shines blue.
Range:
0 to 255
*RST:
0
Manual operation:
SYSTem:LED:COLor
<color>
Sets the color of the sensor module status LED, if the LED operating mode
Parameters:
<color>
Range:
0 to 0x0FFFFFF
*RST:
0xA0A0A0
Configuring the general functions