![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371094.webp)
Remote control commands
R&S
®
NRPM
94
User Manual 1425.8663.02 ─ 07
Table 10-1: Units
Noted default
unit
Corresponding basic
unit
Frequency
Hz
Seconds
s
Watts
W
Angle
degrees
Percent
PCT
DB
dB
DBM
dBm
DBUV
dBuV
10.2
Notations
For a detailed description of SCPI notations, see
Numeric suffixes <n>
If a command can be applied to multiple instances of an object, e.g. specific sen-
sor modules, the required instances can be specified by a suffix added to the
command. Numeric suffixes are indicated by angular brackets (<1...4>, <n>, <I>)
and are replaced by a single value in the command. Entries without a suffix are
interpreted as having the suffix 1.
Optional keywords [ ]
Some command systems permit certain keywords to be inserted into the header
or omitted. These keywords are marked by square brackets in the description.
The instrument must recognize the long command to comply with the SCPI stan-
dard. Some commands are considerably shortened by these optional mnemonics.
Therefore, not only is there a short and a long form for the commands (distin-
guished here by uppercase and lowercase letters) but also a short form which is
created by omitting optional keywords.
Notations