![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371116.webp)
Remote control commands
R&S
®
NRPM
116
User Manual 1425.8663.02 ─ 07
Suffix:
<Channel>
.
1...3
Usage:
Query only
Manual operation:
[SENSe<Sensor>:]CHANnel<Channel>[:ENABle]
<state>
Deactivates channels without an antenna module connected.
Note:
A sensor module channel which does not have a connected antenna mod-
ule causes a static error condition. The static error leads to a blinking LED. There-
fore we recommend that you disable unconnected channels by this command.
Suffix:
<Channel>
.
1...3
Parameters:
<state>
*RST:
ON
Manual operation:
10.4.3
Selecting the reference source
The
ROSCillator
subsystem contains commands for configuring the reference
source.
[SENSe<Sensor>:]ROSCillator:SOURce
<source>
Selects the source of the reference frequency.
Parameters:
<source>
INTernal | EXTernal | HOST
INTernal
Internal precision oscillator.
EXTernal | HOST
External signal supplied at the host interface connector.
*RST:
INTernal
Example:
ROSCillator:SOURce EXTernal
Configuring the general functions