Troubleshooting
R&S
®
NRPM
190
User Manual 1425.8663.02 ─ 07
Figure 12-3: Placing the new cable
5.
NOTICE!
Connect the new cable in a linear movement to prevent damage.
Connect the new cable until it snaps in.
Figure 12-4: Connect new cable
6.
NOTICE!
Monitor the position of the cable tie head.
Place the cable tie. Use the notch to place the cable tie correctly.
Figure 12-5: Placing a cable tie
7.
NOTICE!
Risk of damage of the cable and the connector. Make sure that the
force of the automatic cable tie gun is set correctly to prevent cable damage.
Make sure that the cable is free of load.
Fasten the cable tie.
Use the cable tie tool (part no. GSB2 or equivalent). Set the force of the cable
tie tool to 50
N ±5
N.
Replacing antenna cables