![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371097.webp)
Remote control commands
R&S
®
NRPM
97
User Manual 1425.8663.02 ─ 07
Sets the event status enable register to the specified value. The query returns the
contents of the event status enable register in decimal form.
Parameters:
<register>
Range:
0 to 255
*RST:
0
*ESR?
Event Status Read query
Returns the contents of the event status register in decimal form (0 to 255) and
subsequently sets the register to zero.
Usage:
Query only
*IDN?
IDeNtification query
Returns a string with information on the sensor's identity (device identification
code). In addition, the version number of the installed firmware is indicated.
Usage:
Query only
*IST?
Individual STatus query
Returns the current value of the IST flag in decimal form. The IST flag is the sta-
tus bit which is sent during a parallel poll.
Usage:
Query only
*OPC
OPeration Complete
Sets bit 0 in the event status register when all preceding commands have been
executed. This bit can be used to initiate a service request.
*OPC
must be sent at
the end of a program message.
Common commands