![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371124.webp)
Remote control commands
R&S
®
NRPM
124
User Manual 1425.8663.02 ─ 07
Example: Average count = 1
For average count 1, the setting of the termination control has no impact. In both
cases, the measurement runs for the duration of one aperture time. Then, settled
data are available, and the sensor module returns to the idle state.
1
2
3
4
5
1 = Trigger event
2 = Noninverted chopper phase
3 = Measurement result
4 = Trigger synchronization
5 = Return to idle state
10.5.3.2
Trace mode
General settings for the first two examples:
●
●
[SENSe<Sensor>:]TRACe:AVERage:COUNt
(count 2 is mandatory in
trace mode)
●
[SENSe<Sensor>:]TRACe:AVERage[:STATe]
Controlling the measurement