![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371070.webp)
Performing measurements
R&S
®
NRPM
70
User Manual 1425.8663.02 ─ 07
S-Parameter
Note:
S-parameter compensation is not supported by the R&S
NRPM3 sensor
modules.
Averaging
See
Chapter 10.8.1, "Configuring averaging"
7.2.2.4
Measurement modes
Provides the parameters for the supported measurement modes.
..............................................................................70
Continuous Average mode
Describes the parameters of the continuous average measurement.
Access:
► In the measurement navigation pane of the web browser-based user interface,
select "Continuous Average".
The remote commands required to define the continuous average settings are
described in
Chapter 10.7.1, "Configuring a continuous average measure-
Aperture Time
Sets the aperture time, the width of the sampling windows.
Remote command:
[SENSe<Sensor>:][POWer:][AVG:]APERture
Measurement applications