![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371217.webp)
Remote control basics
R&S
®
NRPM
217
User Manual 1425.8663.02 ─ 07
A.2.8.3
Operation trigger status register
The
CONDition
register contains information about whether a sensor module is
currently in the waiting for trigger state, i.e. expecting a trigger event and,
depending on the configuration of the transition register. The
EVENt
register indi-
cates whether the waiting for trigger state was entered or quit by a sensor module
since the last readout of the register.
Querying the register:
●
STATus:OPERation:TRIGger:CONDition?
●
STATus:OPERation:TRIGger[:SUMMary][:EVENt]?
Table A-10: Meaning of bits used in the operation trigger status register
Bit No.
Meaning
0
Not used
1
sensor module waiting for trigger
The sensor module is in the waiting for trigger state and is waiting for a trigger
event. When the trigger event occurs, the sensor module changes into the mea-
suring state.
5 to 15
Not used
A.2.8.4
Operation sense status register
The
CONDition
register contains information about whether a sensor module is
currently being initialized and, depending on the configuration of the transition
register. The
EVENt
register indicates whether a sensor module initialization was
started or completed since the last readout of this register.
This status is assumed by a sensor module if one of the following conditions is
met:
●
The supply voltage is switched on (power up)
●
The sensor module was just connected
●
A reset was performed using:
–
–
Querying the register:
●
STATus:OPERation:SENSe:CONDition?
●
STATus:OPERation:SENSe[:SUMMary][:EVENt]?
Status reporting system