![background image](http://html1.mh-extra.com/html/rands/nrpm/nrpm_user-manual_3219371162.webp)
Remote control commands
R&S
®
NRPM
162
User Manual 1425.8663.02 ─ 07
Positive error numbers indicate sensor module specific errors. Negative error
numbers are error messages defined by SCPI.
If the error queue is empty, the querry returns 0 ("No error").
Usage:
Query only
10.11.2
Reading out the CONDition part
For more information on the CONDition part see
Chapter A.2.2, "Structure of an
STATus:DEVice:CONDition?
STATus:OPERation:CALibrating:CONDition?
STATus:OPERation:CONDition?
STATus:OPERation:LLFail:CONDition?
STATus:OPERation:MEASuring:CONDition?
STATus:OPERation:SENSe:CONDition?
STATus:OPERation:TRIGger:CONDition?
STATus:OPERation:ULFail:CONDition?
STATus:QUEStionable:CALibration:CONDition?
STATus:QUEStionable:CONDition?
STATus:QUEStionable:POWer:CONDition?
These commands read out the
CONDition
section of the status register.
The commands do not delete the contents of the
CONDition
section.
Usage:
Query only
10.11.3
Reading out the EVENt part
For more information on the EVENt part see
Chapter A.2.2, "Structure of an SCPI
STATus:DEVice[:EVENt]?
STATus:OPERation:CALibrating[:SUMMary][:EVENt]?
STATus:OPERation[:EVENt]?
STATus:OPERation:LLFail[:SUMMary][:EVENt]?
STATus:OPERation:MEASuring[:SUMMary][:EVENt]?
STATus:OPERation:SENSe[:SUMMary][:EVENt]?
STATus:OPERation:TRIGger[:SUMMary][:EVENt]?
Using the status register