Publication No. 980935 Rev. A
3152B User Manual
Pulse Example,
Section 1
Now that we are familiar with the Pulse Composer and its operation,
we are ready to start building the first section of the pulse as shown
in Figure 4-47. Point and click on the New icon and open the Pulse
Editor. Type in the level and time intervals as shown. Note that the
pulse segments are being created on the screen as you type the
values.
Tips
1. Use the tab key to navigate Section Structure fields.
2. Use Append to add an index line at the end of the list.
3. Use Insert to add a segment above the selected line.
Before we proceed with the design of the next section, observe
some values which are displayed on the Pulse Composer screen. In
the lower left corner of the composer, the Vertical Scale is 10 V
(1.25 V/Div) and the Horizontal Scale is 14 ms (1.4 ms/Div). These
two values are critical for the integrity of the design because they
will later be used by the program to set pulse timing. These values
can change as you add more sections to the pulse train.
Figure 4-51, Building Section 1 of the Pulse Example
EADS North America Test and Services
ArbConnection 4-67
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
