Panasonic VF200 Скачать руководство пользователя страница 237

Страница: 237 / 289

Appendix Function Parameter List

230

P116

The 2

Base Frequency

The 2

base frequency can be selected and set with the 2

characteristics

select button.

(It is valid only when parameter P005 is set to “FF” or “3C”.)

■

Parameter P116: The 2

Base Frequency

Data setting range

(Hz)

45.0 to 400.0

・

The maximum output frequency can be

set by parameter P005 (V/F Mode) or

parameter P008 (Max. Output

Frequency).

・

If “P005: V/F Mode” is set to “50” or “60”, the maximum output frequency and

base frequency will be fixed values.

・

A frequency value exceeding “P100: Upper Frequency Limit” cannot be

output.

・

If a general-purpose motor with rated frequency of 50/60 Hz is running at a

frequency value exceeding the ratings, the motor may be damaged.Therefore,

please set the frequency to match motor characteristics.

・

If the base frequency is required to be changed together with the maximum

output frequency for a dedicated high-speed motor etc., such change can also

be changed with the parameter.

・

When running the general-purpose motor at a frequency value exceeding

the universal frequency, please set the base frequency to the rated output

frequency (50/60 Hz) of general-purpose motor.

・

When the general-purpose motor reaches a level exceeding the base

frequency (normally 50/60 Hz), the motor will have the constant output

characteristics and the generated torque will drop in reverse proportion to the

frequency.

Related parameters: P005, P008, P036 to P040, P100, P117, P120 to P123

Содержание VF200


































































































































































































































































































Результаты поиска

Содержание VF200

Отзывы:

Похожие инструкции для VF200

Бренды по названию

Популярные бренды

Panasonic VF200, Инструкция по эксплуатации

Результаты поиска

Содержание VF200

Отзывы:

Похожие инструкции для VF200

Бренды по названию

Популярные бренды