Panasonic VF200, Инструкция по эксплуатации

Страница: 81 / 289

5. Control Status Monitor
7
4
n009
n010
Control Circuit Terminal Status (Input Signal)
Control Circuit Terminal Status (Output Signal)
For displaying various status of input and output signals of control circuit
terminals.
When input terminals (
②
to
⑧
) and common terminal (
①
or
⑨
) are turned
ON, segment a1 to g1 light up; when input terminals (
②
to
⑧
) and common
terminal (
①
or
⑨
) are turned OFF, segment a1 to g1 light out.
When output terminals are closed (ON) between
⑩
to
⑫
and
⑪
to
⑫
,
segment a1 and b1 of n010 light up; when output terminals are opened (OFF)
between
⑩
to
⑫
and
⑪
to
⑫
, segment a1 and b1 of n010 light out.
Segment c1 lights up when the output terminal is ON (Excitation in ON status:
short circuit across A-C; non-excitation in ON status: short circuit across B-C);
segment c1 lights out when the output terminal is OFF (Excitation in ON status:
open circuit across B-C; non-excitation in ON status: open circuit across A-C).
LED segment indication
Monitor No. I/O signal
Terminal
indication
Signal ON Signal OFF
Run/stop “a” lights up “a1” lights up “a1” lights out
Forward/reverse run “b” lights up “b1” lights up “b1” lights out
SW1 “c” lights up “c1” lights up “c1” lights out
SW2
“d” lights up “d1” lights up “d1” lights out
SW3 “e” lights up “e1” lights up “e1” lights out
SW4 “f” lights up “f1” lights up “f1” lights out
n009
SW5 “g” lights up “g1” lights up “g1” lights out
Open-collector 1 “a” lights up “a1” lights up “a1” lights out
Open-collector 2 “b” lights up “b1” lights up “b1” lights out n010
Relay “c” lights up “c1” lights up “c1” lights out