Panasonic VF200, Инструкция по эксплуатации

Страница: 26 / 289

2. Installation
2.2 Installation Precautions
■
Do not install the inverter in the following locations.
·
Locations subject to direct sunlight
·
Locations subject to water vapor or high humidity
·
Locations with large amount of oil mist, dust or fiber dust
·
Locations where rain water, water drops or oil drops may come in contact
·
Locations where corrosive gases, explosive gases or flammable gases are
present
·
Installation onto flammable materials such as wood, or near flammable
materials
·
Locations subject to vibration
■
Make sure that ambient temperature stays within the specifications.
If the inverter is installed near a heat generating device or is housed in a panel,
surrounding temperature will increase. This may reduce the life of the inverter.
When housing the inverter in a panel, give sufficient consideration to cooling
method and panel size.
○
Allowable ambient temperature: -10 to +50 °C
(Ambient temperature should be measured at a point 5 cm from the inverter.)
○
In case multiple inverters are installed
If multiple inverters are installed sideways, ambient temperature should be
within -10 to + 40 °C.
■
Install the inverter vertically.
Installing the inverter in any other way will decrease heat dissipation effect and
result in malfunction.