Panasonic VF200, Инструкция по эксплуатации

Страница: 198 / 289

Appendix Function Parameter List
1
91
P045 Multi-speed Function Select
When SW1 to SW5 (control circuit terminal No.4 to No.8) are set as multi
speed function with parameter P036 to P040 and SW2 (control circuit terminal
No.5) is set as pulse counter input function with parameter P037, each control
function can be set through the parameter.
Setting value Details
0
Set to “multi-speed frequency operation”
1
Set to “2
nd
/3
rd
/4
th
acceleration/deceleration operation”
2
Set to “acceleration/deceleration linked with multi-speed
frequency operation”
3 Set to “multi-speed frequency operation using timer”
4
Set to “acceleration/deceleration linked with multi-speed
frequency operation using timer”
5 Set to “multi-speed frequency operation using pulse input”
6
Set to “acceleration/deceleration linked with multi-speed
frequency operation using pulse input”
When setting value is “0” to “2”, set SW1 to SW5 (control circuit terminal No.4 to
No.8) to “multi-speed function” (setting value = “0”) with parameter P036 to P040.
When setting value is “3” to”4”, SW1 to SW5 (control circuit terminal No.4 to
No.8) are invalid even if they are set to “multi speed function” with parameter
P036 to P040.
When setting value is “5” to “6”, set SW2 (control circuit terminal No.5) to
“pulse counter input function” (i.e. setting value “11”) with parameter P037.
Multi-speed frequency operation (setting value = “0”)
The 2
nd
/3
rd
/4
th
acceleration/deceleration operation (setting value = “1”)
Acceleration/deceleration linked with multi-speed frequency operation
(setting value = “2”)