Omron FQ2 Series, Руководство пользователя

Страница: 271 / 516

Controlling Operation and Outputting Data with a Parallel Interface Sensor Data Unit
FQ2 User’s Manual
269
8
Co
ntro
llin
g Operatio
n an
d Ou
tp
utti
ng Da
ta
with a Parall
el Con
nection
●
Timing Chart
Operation When [Number of Delay] Is Set to 2
1
Repeatedly turn ON the TRIG signal while the BUSY signal is OFF.
2
The OR signal is output when the TRIG signal is turned ON.
3
When the TRIG signal turns ON for the third time, the measurement result (D0) for the first time
that the TRIG signal turned ON is output and the GATE signal is also output at this time.
4
When the TRIG signal turns ON for the fourth time, the measurement result (D0) for the second
time that the TRIG signal turned ON is output and the GATE signal is also output at this time.
5
Each time the TRIG signal turns ON after that, the measurement result (D0) from when the TRIG
signal turned ON two times previously is output.
(Res u lt not
o u tp u t.)
The res u lts for (1) is o u tp u t w hen the TRIG signal
t u rns O N the third time.
Res u lt for (1) Res u lt for (2) Res u lt for (3) Res u lt for (4)
(1) (2) (3) (4) (5)
TRIG signal
OFF
O N
OFF
O N
OFF
O N
OFF
O N
O N for 1 ms min.
BUSY signal
OR signal
D0 signal
GATE signal
R u n Mode entered.
RU N signal
Set u p Mode entered.
GATE O N delay
O u tp u t time
O N w hile meas u rements are b eing processed
(depends on BUSY o u tp u t conditions)
O v erall j u dgement
res u lt for (1)
O v erall j u dgement
res u lt for (2)
O v erall j u dgement
res u lt for (3)
O v erall j u dgement
res u lt for (4)
O v erall j u dgement
res u lt for (5)